Talos-security DRL800 DVR Manual Manuel d'utilisateur

DRL Series Digital Video Recorder User Manual DRL1600 / DRL800 / DRL400 0

9 2.2 System Organization SMS CAMERA PTZ KEYBOARD MAIN/SPOT MONITOR MIC SIREN SENSOR SPEAKER PTZ LCD/VGA MONITOR Video out Network Video input Audi

10 3. DVR ORGANIZATION 3.1 Front Panel Description NOTE: Turn on the DVR after connecting the power cord, camera input and monitor completely Power

11 3. DVR ORGANIZATION 3.1 Front Panel Description NOTE: Turn on the DVR after connecting the power cord, camera input and monitor completely ▪ Fro

12 The front panel of the DVR is similar to a normal VCR or Multiplexer and the functions are also similar. Front panel controls can be used for all

13 Direction buttons (▲, ▼, ◀, ▶ ) These buttons are used to move to another menu or change the position of the screen. In PTZ mode, buttons are use

PTZ RS-485 4 Sensor Input Camera Input 14 Audio In / Out Network Power on 2 3 4 1 5 6

15 Audio In / Out Spot Out Power On Network CVBS Monitor 8 Sensor In

SEARCH 16 ▪ How to set ID ① Before setting up IR remote ID, Enter the GENERAL SETUP and select the unit ID. (Default is 0) ② While pressing and holdi

17 4. LIVE - Record Icon (Red) When record in live screen. - Time Icon When record by designated time. - Motion Icon When motion is occurred.

18 In live screen, if ▲ button of the remote controller or front panel is pressed, or if the mouse cursor is placed over the top area of the screen th

1 WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PART

19 In live screen, if the ENTER button of the remote control or front panel is pressed, a blue square cursor will appear. If the ENTER button is press

20 ▪ Using Mouse: For the above menu click the right mouse button to control functions Zoom, Focus and Iris functions. ▪ PTZ: PTZ Camera sho

21 ▪ SPEED SETUP: Set the PTZ camera speed (1 to 8) NOTE: If the mouse is used to move the PTZ camera, the movement speed depends on the positi

22 5. SETUP General, Camera, Event, Schedule, Ethernet and System Information. On the Top menu, select the [SETUP] menu. After menu is selected the f

23 [SYSTEM] ▪ VIDEO FORMAT: Set the Camera Type (NTSC / PAL) If menu is set to AUTO the DVR will recognize the cam

24 [DATE / TIME] ▪ DATE FORMAT: Select the data format. (YY/MM/DD) / (MM/DD/YY) / (DD/MM/YY) ▪ TIMEZONE: Select th

25 ▪ SIGNAL: Select on/off to use alarm by channel. ▪ ALARM SET: Check the alarm connection to ensure it is working properly.

26 [CHECK / USB] ▪ EARLIEST RECORD: Displays the earliest recorded data information. ▪ LATEST RECORD: Displays the latest recorded data information

27 ▪ RESOLUTION: Select the optimal resolution for the connected monitor. If you select the [AUTO] option, HDMI monitor

28 ▪ Add / delete any user and select permissions. ▪ When adding users new passwords are required. ▪ When deleting users you will need to confi

2 IMPORTANT SAFETY INFORMATION 1. Read Instructions All the safety and operating instructions should be read before the device is operated. 2. Retain

29 ▪ SLOT: Select the slot/name to load or save DVR configurations. ▪ DEFAULT: Reset to factory default settings. ▪ DATE: Displays the configurati

30 ▪ RESTART: Restarts the DVR. ▪ SHUTDOWN: Shuts down the DVR. 5.1.7 SHUTDOWN

▪ CAMERA LABEL: Select the camera channel label for live viewing. (ALL / NUMBER / NAME / OFF) ▪ NAME: Change the camera n

32 When selecting the camera, the virtual keyboard will appear. Maximum 10 characters. [Virtual Keyboard] [PTZ] ▪ PORT: Select the Baud Rate for th

33 CAMERA: Select the camera for display on spot monitor. DEFAULT: Select the camera for display on spot monitor when sequence is off. SEQUENCE: Se

34 PAGE DWELL TIME: Select the page dwell time. CAMEO DWELL TIME: Select the dwell time for CAMEO sequence. [DWELL-TIME selected screen] [CAMERA

35 ▪ ZONE ENABLE: Select On/Off to use. (LIVE mode/ SEARCH mode) ▪ ZONE COLOR: Select the color of privacy zone area. ▪ ZONE: Select the zone.

36 [INPUT] ▪ ACTIVE: Select On/Off to activate motion detection. ▪ LEVEL: Select the sensitivity level for motion detection. (Select 1 to 5 level) ▪

37 ▪ AREA SETUP In the Area setup, the highlighted square is shown at the left top side of the screen. Press enter and the active area will be change

38 [ACTION] ▪ RECORD: Select the channel for record. ▪ ALARM: Select On/Off for alarm. ▪ BUZZER: Select On/Off for buzzer. ▪ PRESET: Set the pre

3 1. SAFETY ---------------------------------------------- 6 1.1 Power Source ------------------------------------------------- 6 1.2 Installation -

39 [INPUT] ▪ ACTIVE: Select On/Off to activate alarm. ▪ NAME: Name alarm input. ▪ TYPE: Select the alarm type. (NO : Normal Open / NC : Normal Close

40 [INPUT] ▪ ACTIVE: Select On/Off to activate. 5.3.3 VIDEO LOSS TIP: If you select the ACTIVE+ menu, you can change all setting at once. [ACTION]

41 [WARNING] ▪ CHECK INTERVAL: Select the check interval time. (Select 1 hour to 24 hour) ▪ DISK WARNING: Select the option for smart warning. (POPUP

42 ▪ DISPLAY: Select display time by second. (Select 0 to 100) ▪ EVENT ICON: Select On/Off to display event icon. ▪ EVENT POPUP: Select On/Off to pop

43 5.4 RECORD SETUP In this menu is the Resolution, Schedule, Record, Audio, Manual, Filter setup. Select the [RECORD] menu. 5.4.1 RESOLUTION ▪ RESO

44 ▪ SETUP MODE: Select the recording schedule. (TYPICAL / CUSTOM) ▪ DAY TIME: Select the day time schedule time. (Night time is automatically set ac

45 [DAY] / [NIGHT] / [WEEKEND] ▪ TIME: Set the frame rate and resolution per channel for time based recording. ▪ EVENT: Set the frame rate and resol

46 ▪ RECORD : Select On/Off for audio recording per channel. 5.4.4 EVENT TIP: If you select the RECORD+ menu all setting you can be changed at on

47 5.4.6 MANUAL ▪ SPEED: Select the recording frame rate per channel. ▪ Quality: Selects the compression quality per channel. ▪ AUDIO: Select On/Off

48 5.5 ETHERNET SETUP Network, Serial, DDNS, E-mail setup. Select the [ETHERNET] menu. 5.5.1 NETWORK [ETHERNET] ▪ DYNAMIC IP: Select On/Off for dynam

4 5.2 CAMERA SETUP ----------------------------------------------------- 34 5.2.1 CAMERA ------------------------------------------------------- 34 3.

49 5.5.1 NETWORK [CLIENT] ▪ CLIENT ACCESS: Select client access options. ( ALL / RANGE ) ▪ BEGIN ADDRESS / END ADDRESS: Enter range of IP addresses w

50 5.5.2 SERIAL [RS-232 INPUT SETUP] ▪ SERIAL TYPE: Select external device. ▪ MODEL: Select the protocol to use. ▪ PORT: Select the Baud Rate / Data

51 5.5.3 DDNS ▪ DDNS SERVER: Select the DDNS server. (Ddnsdvr.com / Dyndns.com / ChangeIP.com) ▪ HOST NAME: Input the host name from the registered D

52 5.5.4 E-MAIL [ADDRESS] ▪ SEND E-MAIL: Select On/Off for email notifications. ▪ SCHEDULE: Set the notification schedule. (From : Start time / To :

53 5.5.5 NET FRAME ▪ FPS: Select the frame rate per channel for network transmission. ▪ QUALITY: Select the image quality per channel for network t

54 5.6 SYSTEM SETUP System Log, Status, Version. Select the [SYSTEM] menu. 5.6.1 SYSTEM LOG ▪ Check the system log with the left and right directio

55 5.6.2 STATUS [DISK] ▪ HDD INFORMATION: Displays the HDD status. Note: DVR will check the HDD for bad sectors automatically and skip these sectors f

56 5.6.2 STATUS [RECORD] ▪ Display RECORD Status. [AUDIO] ▪ Display AUDIO Status.

5.6.3 VERSION 57 ▪ Display DVR version and information. 5.6.4 UPGRADE ▪ TYPE: Select the upgrade type. (FTP or Media) ▪ DEVICE: Select the device wh

58 6. SEARCH On the Top menu, select the [SEARCH] menu. After selecting this menu the following Log-in window will appear. Enter the password and pr

5 6. SEARCH ------------------------------------------------------------- 62 6.1 Search Screen -------------------------------------------------------

59 * As in the live view the top menu can be used in the search screen. 6.1 Search Screen Configuration Search Icon Camera Name Search Information Ic

60 a. Select the date and time data. ▪ Recorded data is then displayed in the timeline. 6.1.2 CALENDAR SEARCH b. Select the start hour and minutes ▪ A

61 ▪ HOUR: Select time period to view. ▪ PREV: Display previous page. ▪ NEXT: Display next page. ▪ GOTO: Display the video data per event. 6.1.3 EVENT

62 6.1.4 OVERLAPPED LIST ▪ If a user changes the time or applies DST (Daylight Saving Time) there will be an overlap in data. ▪ Search options are

63 6.1.5 PANORAMA SEARCH ▪ During normal search press the [PANORAMA] button. ▪ By clicking the right mouse button and select [PANORAMA] Search. ▪ Pla

64 6.1.7 MUSEUM SEARCH ▪ Select [MUSEUM SEARCH] function menu. ▪ Select the Museum search area.

65 6.1.7 MUSEUM SEARCH ▪ Select the start and end time then select SEARCH. ▪ Preview event list will appear. ▪ Select the event for playback.

66 Button Explanation SEARCH Display the [SEARCH] menu ESC Cancel the Search mode or return to the live screen ENTER Select the CAMEO menu FAST

67 7. BACKUP ▪ TARGET: Select the device to backup. (USB / DVD) ▪ FROM: Select the start date and time. ▪ TO: Select the end date and time. ▪ BA

68 ▪ During backup the DVR Player is copied to the media with the data. ▪ Backup data can only be played using DVR Player, SMS or the DVR. ▪ Export t

6 6 1.1 Power Source-related ① Insert the power plug fully and firmly into the power source. - Unstable connection may cause fire.

69 1. Copy the firmware on USB and connect to the USB port. 2. For upgrades restart the DVR. 3. After restart the upgrade window will appear,

70 ※How to connect 8. APPENDIX For using web connection through internet, ports 7000 and 80 should be forwarded in the router to the DVR IP address..

71 Screen split options ① ② ③ ④ ① ② ③ ④ Control Brightness control Contrast control PTZ Zoom In Zoom Out Alarm Search Open data Exit search Connect

72 Model DRL1600 DRL800 DRL400 Performance PENTAPLEX Display Speed (NTSC / PAL) 480 / 400 fps 240 / 200 fps 120 / 100 fps Recording Speed (N

73 Symptoms Action No Power If the power LED is not illuminated, check the items below. - Check the power cord connection to the wall outlet. - Ch

74 No IR remote control - Check the battery installation. - Check the ID of the IR remote control. - Point the IR remote control at the DVR system.

8. APPENDIX 8.6 Mobile Viewer (Apple & Android) - Download the Talos Connect App for iPhone or iPad (Free software) - Download the Talos Connect

-. Enter the DVR remote connection information. - press the button after all fields have been completed. - From the DVR site list me

- Support 1,2,8,16 split screen. - Double touch the cameras to change to single screen or multi screen view. - Horizontal and Vertical viewing is su

- App functions: 8.6 Mobile Viewer (Apple & Android) Image capture: Saves JPEG image of single camera view Pause: Pause (freeze) live view Paus

7 7 ⑥ When cleaning the product, unplug the power cord and gently wipe using a soft cloth. Do not directly spray water on

8 *Some Functions May Not Be Supported By All Models This DVR provides superior video image quality, reliability, and performance. • Pentaplex Op